Commercial roof costs in Nashville: a budget guide
Typical installed ranges for the work facility managers budget most, from a single leak repair to a full tear-off. Use them to plan a year, then let a site visit set the real number.

Filter and sort the 27 budget lines
Per square foot figures are installed prices for a typical low-rise building with reasonable access. Visit and each prices are per call or per item.
| Work | Type | Typical range | Notes |
|---|---|---|---|
| 60-mil TPO, mechanically attached, tear-off | Replacement & new roofs | $7.15 to $11.80 per sq ft | Includes new polyiso to current code R-value |
| 80-mil TPO, fully adhered over cover board | Membrane systems | $8.90 to $13.40 per sq ft | Adhered systems cost more and resist wind and noise better |
| PVC membrane for restaurant or grease exposure | Membrane systems | $9.45 to $14.10 per sq ft | Higher material cost, better chemical resistance |
| EPDM replacement, fully adhered | Membrane systems | $6.85 to $10.70 per sq ft | Black or white; seams taped and primed |
| Single-ply recover over one existing roof | Replacement & new roofs | $5.40 to $8.85 per sq ft | Needs a dry survey and a sound deck |
| Two-ply SBS modified bitumen | Membrane systems | $7.90 to $12.20 per sq ft | Torch, cold or self-adhered by building and fire risk |
| Built-up roof restoration (gravel removed) | Coatings & restoration | $3.15 to $5.70 per sq ft | Only when the base plies are still attached |
| Silicone coating restoration, 20 to 25 mils | Coatings & restoration | $2.65 to $4.95 per sq ft | Includes cleaning, seam detailing and wet area repair allowance |
| Acrylic coating restoration, two coats | Coatings & restoration | $2.20 to $4.10 per sq ft | Needs positive drainage and warm cure days |
| Metal roof coating with fastener and lap detailing | Coatings & restoration | $2.45 to $4.60 per sq ft | Rust treatment and butyl at laps add cost |
| Spray foam roof, 1.5 in with silicone topcoat | Membrane systems | $5.85 to $9.30 per sq ft | Price climbs with thickness and odd shapes |
| Standing seam metal, 24 gauge, new | Metal & sloped roofs | $12.80 to $19.70 per sq ft | Panel profile, trim and slope drive the range |
| Metal retrofit: flute fill plus single-ply | Metal & sloped roofs | $6.95 to $10.85 per sq ft | Avoids removing the metal roof |
| Architectural shingles on a commercial or multifamily roof | Metal & sloped roofs | $4.15 to $6.90 per sq ft | Per sq ft of roof surface, multi-building pricing varies |
| Tapered insulation and crickets to fix ponding | Replacement & new roofs | $1.85 to $4.40 per sq ft | Per sq ft of tapered area, depends on slope needed |
| Metal deck replacement found during tear-off | Replacement & new roofs | $6.35 to $11.20 per sq ft | Per sq ft of deck replaced; welding and structural checks |
| Typical leak repair visit with membrane patch | Repairs & leaks | $465 to $1,380 per visit | Most single-leak repairs on single-ply land here |
| After-hours emergency leak response | Repairs & leaks | $720 to $2,150 per visit | Temporary seals and interior protection, before the permanent fix |
| Emergency dry-in after storm damage | Repairs & leaks | $1.35 to $3.80 per sq ft | Per sq ft of opened or damaged roof |
| Commercial roof inspection with photo report | Inspections & maintenance | $385 to $1,150 per visit | Size, access and core cuts change the price |
| Infrared moisture survey with core verification | Inspections & maintenance | $0.09 to $0.24 per sq ft | Per sq ft of roof, minimum charge applies |
| Spring and fall maintenance plan | Inspections & maintenance | $0.07 to $0.19 per sq ft/yr | Per sq ft per year, two visits plus minor repairs |
| Parapet coping replacement | Flashing & edges | $34.50 to $68.75 per lin ft | Per linear foot with new underlayment and cleats |
| ANSI/SPRI ES-1 tested edge metal | Flashing & edges | $18.40 to $37.90 per lin ft | Per linear foot, gauge and profile vary |
| Roof drain rebuild with new clamping ring | Inspections & maintenance | $640 to $1,890 each | Per drain; cast iron bodies cost more to rework |
| HVAC curb reflash | Flashing & edges | $545 to $1,620 each | Per curb, height and unit size matter |
| Curb-mounted skylight replacement | Flashing & edges | $1,390 to $3,760 each | Per unit, safety screen extra |
These are planning ranges, not quotes. We price every job after a site visit.
What moves a Nashville commercial roof price the most
Two roofs of the same size can land at opposite ends of a range. These are the usual reasons.
Wet insulation
Every wet board found in a survey gets cut out and replaced before a recover or coating.
Access and height
Downtown alleys, crane permits and mid-rise roofs add equipment and hours that a one-story warehouse never needs.
Tear-off depth
Two old roofs, gravel ballast or asbestos-era felts cost more to remove and haul.
Penetrations and curbs
A roof covered in RTUs, pipes and exhaust fans takes far more flashing labor per square foot.
Energy code insulation
Full replacements usually need added polyiso to meet the current energy code, which raises material cost.
Phasing an occupied building
Working in small sections around tenants, odor limits or night hours stretches the schedule.
How to use these numbers in a capital plan
Start with the roof's age and system, then pick the line that matches the next likely move: maintenance, restoration, recover or replacement. Multiply by your roof area and add 10 to 15 percent for the unknowns that only show up when the roof is opened.
Coatings and recovers look cheap per square foot, but they only work on dry roofs. Budget for a moisture survey the year before you plan to spend, so the number in your plan is the one you actually need.
Budget questions we hear every week
Why are Nashville commercial roof costs quoted per square foot?
Most of the labor and material scales with area, so per square foot pricing lets you compare bids. Edges, curbs and drains are priced per foot or per item on top, which is why two bids with the same square foot number can still differ.
How much should a Nashville property budget for roof maintenance each year?
A spring and fall maintenance plan typically runs a few cents to just under twenty cents per square foot per year, plus repairs found on the visits. It is the cheapest line in the guide and stretches every other number further.
Do these budget ranges include permits and disposal?
Replacement lines include typical tear-off and disposal. Permit fees are set by Metro Nashville Codes or the city or county office where the building sits, and we list them separately in the written scope.