Skip to content
KestrelCommercial Roofs · Nashville

Commercial roof warranties explained: NDL, material-only and workmanship

A warranty is a contract with exclusions, not a guarantee against leaks. Knowing the three common types, and the habits that void them, saves owners real money when a claim comes up.

Percy LangstonFacility Roof Guides EditorUpdated

Facility manager seen from behind holding a clipboard and binder of roof documents while standing on a walk pad atop a white TPO roof, with a Nashville office tower skyline beyond.
Facility guide

The short version

Commercial roofs usually carry up to three kinds of warranty. A material-only warranty covers defective product. An NDL (no dollar limit) warranty covers repair costs without a cap, when the manufacturer issues one. A contractor workmanship warranty covers installation errors. Ponding, unapproved repairs, missed maintenance and rooftop damage commonly void coverage.

Three documents, three different promises

When people say they have a ten, fifteen or twenty year warranty, they usually mean one of three things. Sometimes it is the manufacturer promising that the sheet itself will not fail. Sometimes it is a system warranty that includes the installation. Sometimes it is just the contractor's workmanship promise. These are not interchangeable, and the difference shows up the day a leak appears.

The paper you were handed at closeout names which one you have. Look for the issuer, the term, what is covered, what is excluded and what you must do to keep coverage alive. If you cannot locate that document, ask the building's previous manager or contact the manufacturer with the roof's address and install date. Many keep records by project.

A manufacturer warranty is available only when the system and installer qualify under that manufacturer's program, and the terms are the manufacturer's to set. We never promise a specific warranty before reviewing the roof, the deck and the intended system, because the right answer depends on what is under the membrane. Ask for the actual form, not a summary, before you rely on it.

Read the fine print on transfers and on who may touch the roof. Warranties often say only the installer or an approved contractor may repair the membrane. If your maintenance staff patches a seam with the wrong product, the entire coverage can be questioned, even for a defect that has nothing to do with the patch.

What each warranty type covers

These descriptions are general. Every manufacturer writes its own terms, so use this as a map, not a legal reading.

Material onlyNDL systemContractor workmanship
Who issues itManufacturerManufacturerInstalling contractor
Covers defective productYesYesNo
Covers labor to repairUsually noYes, no dollar capYes, for installation faults
Covers installation errorsNoYes, if the leak is from install or productYes
Typical term10 to 30 years10 to 30 years1 to 10 years
Inspection requiredRarelyOften at installVaries

What NDL actually means

NDL stands for no dollar limit. It means the manufacturer will pay to repair leaks caused by covered conditions without capping the cost at the original price of the roof. That sounds generous, and it is. It is also narrow. NDL does not cover storms, punctures, ponding, tenant damage or neglect, which are the causes of most leaks.

Most NDL warranties require the manufacturer to inspect the work, use specific components from start to finish and meet certain thickness and attachment requirements. That costs more upfront. The trade is stronger coverage on the covered failures and a record that the roof was built to the manufacturer's own details. Ask whether those inspections happen during the work or only at the end.

Read the definition of a leak, too. Some warranties require a measurable amount of water entering the building, not just a stain or damp insulation. Others require the owner to prove the leak was not caused by an excluded event. Those definitions decide claims far more often than the dollar limit does.

Material-only and workmanship warranties in practice

A material-only warranty is the thinnest form of coverage. If the membrane itself proves defective, the manufacturer replaces the product, but you pay for the labor to tear off and reinstall it. On a large roof that labor is the bigger share of the cost, so a material-only warranty can feel like a coupon rather than protection.

A contractor workmanship warranty covers errors in installation, such as a poorly welded seam or an unsealed penetration. Its strength depends on the contractor still being in business and willing to answer the phone in year six. Terms of one to ten years are common, and many stop covering a given area once anyone else has worked on it.

When you compare bids, compare the warranty line by line, not by the headline number of years. A twenty year material-only document and a ten year system warranty with labor are different products, and the shorter one may be worth more when a seam opens in a wet spring. Bring the documents to the bid review and read them together.

What commonly voids a warranty

None of these are surprises if you read the document. All of them are common in practice.

Repairs by an unapproved party

Some warranties void if anyone but the installer or a named contractor works on the roof.

Ponding water

Standing water past the stated limit, often 48 hours, can exclude damage nearby.

Rooftop damage by trades

HVAC, antenna and signage crews that puncture or tear the membrane break coverage, unless the repair is documented.

Unreported storm damage

Hail, wind and tornado damage are normally excluded. Insurance, not the warranty, handles those.

Skipped maintenance

Failing to clear drains or document yearly inspections can reduce or eliminate coverage.

Added layers or coatings

A coating or recover applied without manufacturer approval can void what is left of the term.

Changes to drainage

Adding or removing drains, scuppers or downspouts without notice can end coverage tied to the original slope and drainage design.

How to keep a warranty alive

A few habits protect the coverage you paid for. They take little time and little money.

  1. File the paperwork

    Keep the original warranty, spec sheet, drawings and closeout photos in one place the next manager can find.

  2. Read the maintenance clause

    Note the inspection frequency and who is allowed to perform repairs.

  3. Log every rooftop visit

    A simple sign-in sheet at the hatch creates a record of who was on the roof and when.

  4. Report problems fast

    Many policies set a notice deadline after you discover a leak. Missing it can end the claim.

  5. Get repairs documented

    Photos before and after, plus the materials used, protect you if the manufacturer reviews the work later.

Warranty and insurance are different tools

A warranty covers defects in product and installation. Insurance covers sudden damage from events like hail, wind and fire. Mixing them up is the most common source of denied claims we hear about. If a tornado lifts a membrane, the warranty will almost certainly not respond, and your property policy should respond instead.

That means you should keep both active: a maintained warranty and a current insurance policy that covers the roof, ideally at replacement cost. Ask your insurance agent how roof age affects your deductible and payout, because some carriers pay less on older roofs and apply separate wind or hail deductibles. Put both renewal dates on one calendar. Ask your agent which deductible applies to wind and hail.

If you are buying a building, ask the seller for the roof warranty and verify that it is transferable. Many require a written transfer request within a set time after the sale, and some charge a fee. Missing that window can leave a newly purchased roof with no coverage at all. Ask for the transfer form before closing, not after. Ask the manufacturer for its exact transfer steps.

Keep one file for both. When a leak occurs, you will need the warranty document, the roof drawings, the last inspection report and the insurance policy within the first day. A contractor can only tell you which tool fits when the documents are on the table. Write both renewal dates on one calendar. It takes a few minutes and avoids confusion later.

Ask these questions before signing for a new roof

Who issues the warranty, the manufacturer or us? What is the term and is it prorated? Which inspections are required and who pays? What counts as a leak? Is ponding excluded? Is it transferable to a new owner and what does that cost? Put the answers in writing before work begins. A good warranty conversation is short, specific and boring. A vague one usually signals trouble later. Bring the warranty to any bid meeting and ask the contractor to explain each exclusion out loud.

Questions readers send us about this

Can I get an NDL warranty on a roof recover over an existing membrane?

Sometimes. Manufacturers set strict conditions for recovers, including dry insulation, a sound deck and often a cover board. If the existing roof qualifies and the new system is approved for the substrate, a manufacturer warranty may be available. We review the roof before promising anything.

Does a roof warranty cover hail damage in Nashville?

Almost never. Hail, wind and tornado damage are typically excluded from product and system warranties. Those events fall under your property insurance. Keeping your inspection records and photographs helps support the insurance claim.

Who is responsible if HVAC techs damage my warrantied roof?

Often the building owner, unless the service company's contract says otherwise. The damage may also void coverage at that location. Require service contractors to use walk pads, report damage and notify you before leaving the roof.

Call 24/7 · (615) 716-3057